WIFI MOTION SENSOR
Motion sensors can be plugged into any wall socket, receives power directly from the main power line and are programmed to send messages to one or more Avior devices. The integrated brightness sensor allows you to differentiate events depending on the ambient light.
protocols
|
802.11n
|
frequency
|
2,4 ~ 2.5 GHz
|
RANGE 1
|
50 m OUTDOOR TYPICAL
30 m INDOOR TYPICAL
|
TEMPERATURE
|
0 ... 40 °C OPERATING
-10 ... 60 °C STORAGE
|
HUMIDITY 2
|
5 ... 85%
NON CONDENSING
|
DIMENSIONS
|
75 x 40 x 22 mm
|
WEIGHT
|
75 g
|
SENSORS
|
MOTION (PIR) / LIGHT
|
power supply
|
230 VAC 50 Hz
PLUG TYPE T26
|
1 Data throughput and installation range can vary. Network conditions and climatic factors, inclUDING data volume/traffic, construction/structure as well as used materials can influence the data throughput as well as the installation range.
|
2 Only suitable for indoor use – keep devices away from humidity.
|
LED
|
|
OFF
|
SENSOR UNPLUGGED
|
WHITE FOR 30 SEC
|
CONNECTED TO WLAN
|
white blink
|
WAITING FOR WPS 1
|
red
|
STARTING
|
RED blink
|
CONNECTING TO WLAN
|
RED SHORT BLINK
|
AP MODE
|
BUTTON 
|
PUSH FOR 2 SECONDS TO CONNECT SENSOR TO WLAN
ROUTER MUST SUPPORT WPS1
|
PUSH FOR 10 SECONDS TO RESET SENSOR TO FACTORY SETTINGS
connection to WLAN WILL BE lost
|
1 WiFi Protected Setup
|
