E9 - PARAMETERS Each of the 4 bluetooth radio temperature sensors has a parameter group containing resource settings and status. Replace the letter x with the channel identifier from 1 to 4. |
|
Hx0 |
MAC address Address of the BLE peripheral consisting of 6 pairs of characters to be entered without separator (shown on the sensor). If the field is empty the resource is not active. XXXXXXXXXXXX |
Hx1 |
Name Set a meaningful name representing the associated function. 4 ... 15 caratteri alfanumerici - Default: btemp1 .... btemp4 |
THE FOLLOWING PARAMETERS ARE NOT AUTOMATICALLY UPDATED IN THE CLOUD ACCOUNT (KEPT AS LOCAL) IF THE NAME STARTS WITH A POINT INTENTIONAL PUBLICATION IS POSSIBLE WITH THE AT # SMAP COMMAND |
|
Hx2 |
Average Average value of the temperature detected during the defined measurement period. Returns 100 if the value is not available. -20.0 ... 55.0 / 100 |
Hx4 |
Measuring period The period of time during which take the average, minimum and maximum values, in the range 1 to 1440 minutes (24 hours). Default: 1 |
Hx5 |
Battery level Battery charge level that powers the radio sensor. 0...100% |