|
FW 02.19
- Added "recursive" memory variables
- Fixed embedded webserver start on WiFi abilitation
- Fixed bug for "readlog" endpoint of embedded webserver
- Deleted AUDIO folder in SD card
- Added command AT#DDIR to delete folder in filesystem
- Fixed bug for parameters N16 and N17 (they were reversed)
- Added parameters for MQTT
- Added check for BLE start-up if heap memory is not sufficient
FW 02.20
- Increased stack size for command management task
FW 02.21
- Fixed bug for highest/lowest measure of analog inputs
- Fixed bug for analog input average value type
- Added possibility to write a tag including value of other tag (eg. V10=$A19)
- Added analog input used as digital inputs
- Fixed bug for system logs related to "interconnected devices"
FW 02.22
- Added feature to execute rules in incremental order
FW 02.23
- Added check to parse cell parameters MCC,MNC,LAC,CID
- Fixed reply of AT#RM command: removed char 0x00 at the end of reply
- Added URL escape sequence for HTTP POST request
FW 02.24
- Added system log for observed device in BLE
- Increased buffer size for HTTP request
- Fixed AT#RU command to read single user
- Added MQTT functionality
- Added command AT#TRIGGER
FW 02.25
- Fixed various bug for MQTT
- Fixed reply to "readmap" endpoint of embedded webserver
FW 02.26
- Upgraded framework version to v3.2.4
FW 02.27
- Fixed bug to read tag paramters if a space is not present after tag (eg. $A120)
- Fixed bug in "data" field for AT#HTTP command
FW 02.28
- Improved management of configuration parameter;
saved in flash memory only if they change its current value
- Added name of last user call/sms for system log
- Added SSL for MQTT connection (MQTTS)
- Added SSL for HTTP request (HTTPS)
- Fixed bug for log and email sent to cloud
- Added command AT#UART to modify COM port parameters
- Added log types
- Increased priority for wiegand management task
- Improved saving of pulse counters in case of overflow
- Added log for unknown detected BLE
- Fixed bug for "out" and "mem" pulse command with duration of 1 second
(eg. out1=1,1)
- Modified calculus of "recursive" memory variables
- Fixed bug for AT#EU command
- Fixed bug for BLE detected users
- Added log for unknown wiegand user
- Added iBeacon UID support for BLE in observer mode
FW 02.29
- Fixed bug for file audio list read from embedded webserver
- Added trigger for mem and out if tag Mx2 and Ox2 are used (eg. M12=1)
- Fixed bug for update of parameter D14 and D15 at start-up
- Upgraded framework version to v3.2.5
- Added feature to have tag in filename for AT#AFILE and AT#WFILE commands
- Modified out and mem commands to accept case insensitive text
(eg. OuT=1 ouT=0...)
- Fixed bug for wiegand system log
- Added removal of observered BLE user when corresponding user is deleted
- Added removal of last IR code if resource is turned OFF
- Deleted feature mDNS
- Fixed management of commands from APPID
- Increase modem commands queue to 32 positions
- Added wiegand mode for 26bits and 34bits
- Fixed bug for SD card flag presence on cloud
- Increased size for APN parameter
- Fixed bug for user cancellation file
- Included workaround to get incoming call
- Added check for analog input in NTC mode
FW 02.30
- Added log for FW upgrade at start-up
- Fixed bug for interconnected devices initialization
- Fixed reply for command AT#UART
- Added 3 fast blinks of blue led for data connection failed via cellular modem
- Added Modbus RTU feature
- Added escape sequence parsing in AT#MQTT command
FW 02.31
- Increased timeout Modbus RTU to 2500ms
- Fixed bug for trigger of command received from embedded webserver
- Modified parameters for BLE scan in observer mode
- Fixed bug for date update at start-up
- Fixed bug for NTC open and short value
- Fixed various string overflow bugs
FW 02.32
- Added new MQTT implementation
- Fixed bug for MQTT broker parameter if it is void
- Fixed bug for AT#SPK commands sequence (eg. AT#SPK=5 AT#SPK=4)
- Added log for users and rules editing
- Fixed a couple of system log messages
- Modified WiFi mode in STA+AP
- Added system log for observer BLE user not detected
- Fixed bug for user name recovered from user list
- Added operator "search name" for memory variables (eg. var1=$N20?T)
FW 02.33
- Added parameter Y10 "last disconnected interconnected device"
- Fixed bug for MQTT over WiFi
- Fixed bug for last SMS sender not saved after reboot
FW 02.34
- First official release of MQTT in production
FW 02.35
- Added event MID for new connection to Modbus TCP server
- Fixed bug for power supply runtime counters
- Fixed bug for PLMN operator which triggers MQTT and cloud update even if it is not changed
- Modified range for MQTT keepalive to 1080 minutes
- Added check for command from APPID,CHAT and EMAIL from MQTT
- Added AT#CHECKINTERNET command for checking internet connection
- Added resources for BLE door switch and BLE temperature sensor
- Added command AT#CFILE to copy files
- Modified replies to some commands (AT#RFILE, AT#LFILE, AT#RU, AT#RR) if eceived from MQTT
- Fixed bug for MQTT messages retries via cellular modem
- Improved replies to multiple MQTT commands with "subCDR"
- Fixed bug for DNS request failed if WiFi works in AP+STA mode
- Fixed bug for invalid data sent to SMM server: caused by a semaphore not given if previous upload of data fails
- Fixed number of tag present in MAP
- Fixed bug for tags K01..K06 not converted to unsigned integer 64-bit
- Increased maximum length to 320 bytes for AT#MQTT command
- Added escape sequence (e.g. %0A) for payload of AT#MQTT command
FW 02.36
- Fixed bug for AT#UART command: parity was not set correctly
- Added command "AT#UART?" command to read back UART settings
FW 02.37
- Added command AT#FORMAT=D to clear all system files
- Added retry for forward MQTT commands to internal command queue
- Modified initialization for users and group message tasks
- Added a pre-condition for memory variables value calculus: value is cleared if expression is void
FW 02.38
- Added command AT#LOG to add in system log a custom line (e.g. AT#LOG="My custom text string")
- Forced clock update request after a firmware upgrade is performed
- Added support for Telegram reply if command is sent with password (works like SMS)
- Added system logs for incoming command from MQTT
- Added operator HMAC-SHA256 (§) for variable to hash strings with secret key (e.g. var1=$D01§myKey)
- Added delay at start-up for analog inputs used as digital inputs to allow correct measure
- Fixed reply for command AT#ER from MQTT if XXX index is specified: now reply with resolved index
- Fixed reply for command AT#EU from MQTT if start/stop/weekdays are not specified: now reply with resolved ones
- Fixed bug for DLAN activation while WiFi is turned off. It caused software reset
- Fixed bug for ModbusTCP read of memory variables value
- If output is disabled (Ox0=0), it is immediately turned off
- Fixed bug for default name of BLE door switch sensor (door1->doorA, door2->doorB, etc..)
- Added Log for activation and de-activation of WiFi resource
- Fixed bug for ModBusRTU writing of single word register (function code 06h): it was interpreted as double word
- Fixed bug for ModBusRTU writing of double word register (function code 10h): data content was incorrectly formatted
- Fixed bug for ModBusRTU reply in writing double word register (function code 10h): reply was not parsed correctly
- Fixed bug for ModBusRTU: if local console is open requests are discarded
- Added log for events enable/disable (command AT#EVENT)
- Fixed bug for AT#SYNC command which failed to upload all rules and users to cloud through cellular modem in some particular cases
- Fixed bug for BLE temperature sensor if temperature drops below 0deg.
FW 02.39
- Added reply to both Telegram chatbot if command is sent with password
- Added parameter D26: connectivity (cellular or WiFi) used for internet connection
- Added rule name (if present) on trace log for rule execution
- Added to command AT#EU the ability to add tickets to user using "+xxx"
- Improved reactivity of digital inputs with activation time (debounce) equal to 0 seconds
- Increased modem task stack size to 6KB
- Fixed autologout of 30 minutes for COM port console
- Added command AT#LGROUP to list "groups" present in user
- Added command AT#USMM to unlock device cloud account
- Fixed reply to AT#LFILE and AT#RFILE commands from MQTT (if CDR is specified)
- Improved AT#SYNC command over cellular modem (solve bug still present on FW 02.38)
FW 02.40
- Fixed bug for MQTT activation on cellular modem in case WiFi is turned ON but SSID is void
- Fixed regression for MQTT publish of topic "map"
FW 03.00
- Added memory variables varG...varZ
- Added ACCESSORY users and rules
- Fixed write command for ModbusRTU parameters E01..E32: they were saved without type sub-parameter so they were not able to readback
- Fixed bug for outputs/memory bit time with expiring date in format YYMMSShhmm
- Added more memory bits: memG...memZ
- Added wireless output plugs plugA...plugH
- Added to ModbusTCP channel coils and registers for BLE sensors and plug outputs
- Fixed parsing for command AT#MQTT to accept topic parameter enclosed with doubloquotes
- Improved command AT#SMAP to selectively upload to cloud single tag parameter
- Modified location (GEO) upload management
- Added command AT#RGEO to request Reverse GEOcoding to cloud
- Fixed bug for BLE doors and temperature sensors value if BLE is turned off or in advertising mode
- Resources whose name starts with '.' prefix don't upload to cloud their parameters
FW 03.01
- Modified autolog timeout management for embedded webserver
- Fixed default value of INTERCONNECTED DEVICE mode
- Fixed log message for WiFi plugs
- Reduced buffer size for HTTP webserver requests
FW 03.02
- Fixed bug for digital input status value at start-up
- Added condition to avoid log "Event rules enabled" at midnight if events are already enabled
- Fixed bug for parsing command AT#ER received from MQTT
- Removed GATT Server functionality in BLE advertizer
- Reduced queue for HTTP request
- Operator LOGIC AND (&) for memory variable extended also to bit-wise operation
- Operator LOGIC OR (|) for memory variable extended also to bit-wise operation
- Reduced stack size for ModbusTCP task
- Refactored variables for FW upgrade over UART and data from cellular modem
- Fixed parsing of AT#HTTP command in case data is contained inside single quotes ' '
- Fixed bug for parameter "status of connection to MQTT broker" (Q15) if MQTT is disabled
- Fixed bug for WiFi plugs discovery UDP server if WiFi connection was lost
- Modified publish of MQTT map: split in 4 sections to lower memory allocated from the heap
- Enable "retain flag" to Last Will & Testament MQTT topic
- Added "retain flag" to command AT#MQTT
- Fixed bug for MQTT published message (command AT#MQTT) via cellular modem with QoS different from the one specified in configuration
- Fixed bug for MQTT published message if payload is zero
FW 03.03
- Fixed ACCESSORY users not retrieved from webserver endpoints
- Fixed update of memory variables value and expression if name start with "." (local)
- Fixed memory bit set/reset command if name start with "." (local)
- Fixed value of BLE temperature sensor when BLE is turned OFF
- Fixed BACKUP and RESTORE issues
- Fixed value of BLE temperature value is BLE is OFF at start-up
- Added immediate connection to server for AT#GEO command
- Improved G00=1 / G00=0 behavior
- Improved location and time management
- fixed redirect reply to file (e.g. AT#RM=D01->hello.txt)
FW 04.00
- Added parameters S27 status of broker connection
- Added parameters S80 start TCP port of SMM broker
- Added parameters S81 stop TCP port of SMM broker
- Removed device reset in case of too many failure of broker connection
- Device doesn't cycle through broker TCP ports but it reconnects to the same broker port
- Fixed "din66 off" LOG for analog inputs used as digital inputs
- Added reserved command AT+SMMPORT (AT+SMMPORT=<start>,<stop>)
- Added reserved command AT+SMMPORTFIX (AT+SMMPORTFIX=<port>)
- Added parameter S28 (broker port in use)
- Added support for TAG into AT#DWAN command
- Fixed AT#RESTORE command
FW 04.01
- Added verbose message for AT#OTA and AT+FOTA commands
- Added check for data connection availability before executing AT#OTA / AT+FOTA
- Fixed AT#HTTP command now accepting single quotes in third argument
- Added command reply redirection to memory variable (e.g. AT#RM=D01->varA)
- Redirection to variables removes <CR> <LF> and '+'
- Redirection to variables replaces ',' (comma) with ' ' (space)
- Added check to AT#OTA and AT+FOTA command in case current version is already up-to-date
- Added notifications to console for commands with redirection reply
- Continuous re-attempts for failed auto clock update on Sunday at 03:05AM (3 minutes)
FW 04.02
- Fixed possible webid conflict
|