INSTALLATION

Avior can be installed on any standard EN-50022 rail by simple snap-in.

For safe operation the unit must be installed only by qualified personnel in an enclosure which prevents accidental contact with hazardous voltages.

Protection degree IP40 must be guaranteed, raised to IP54 for open air application.



1 Analog inputs

2 Digital inputs

3 Main Power supply

4 Outputs

5 Cellular antenna

6 Link port / Aux power supply


D Output green led indicator

E Radio led indicator

       YELLOW - WiFi

       FAST BLINK : NOT LINKED TO SSID

       SLOW BLINK : LINKED TO SSID

       BLUE - PLMN

       FAST BLINK : NOT REGISTERED

       SLOW BLINK : REGISTERED

TRIPLE BLINK : NO INTERNET

F Digital inputs red led indicator


FAST BLINK : 500 ms ON / 1500 ms OFF

SLOW BLINK : 500 ms ON / 5500 ms OFF



Remove front cover to access the inside:


  1. Push with two fingers on top and bottom side of front cover to release it.

  2. Pull the front cover and keep it in a safe place.


Replace the front cover before to operate the unit.



G Micro-SDTM card holder

H Infrared receiver

L WiFi / Bluetooth antenna

M Infrared transmitter

N Cellular modem

       WITH PLMN OPTION ONLY

P Battery LED

YELLOW WHILE CHARGING

R Power supply LED

       GREEN WHEN POWERED

S PLMN status LED

       WITH PLMN OPTION ONLY