GEOLOCATION


This group contains information and settings associated with the geographical location of the device.

Some features depend on the correct geographical location:

  • Time zone and clock
  • Sunrise and sunset times.



G00

Mode

Positioning mode: SET with command or obtained from the CELLULAR NETWORK.

Parameters can be modified only selecting MANUAL mode.

0 = manual / 1 = cell - Default: manual (set)

G01

Latitude

Latitude of the device, set or (last) obtained automatically.

decimal degrees

G02

Longitude

Longitude of the device, set or (last) obtained automatically.

decimal degrees

G03

Range

If the position was obtained using the PLMN cell, this parameter indicates approximately the radius within which the device should be located.

The value is 10000000 when the cell is not recognized and the position refers to the centroid of the operator's country.

The value is 0 (zero) when the location was obtained using the IP of the WiFi connection.

meters

G04

Address

Address of the device, can be obtained with AT#RGEO command which will reverse geocoding starting from the latitude and longitude data. This command involves data exchange with the server and can be used up to 5 times per day.

G05

Language

Language in use at device location, must be entered a two-character ISO identification code (e.g.: EN). It is advisable to leave it automatically filled, evaluating coordinates, when a data connection is available.

2 ISO characters

G06

Timezone

Timezone at device location, must be correctly formatted (eg: Europe / Rome). It is advisable to leave it automatically filled, evaluating coordinates, when a data connection is available.

G07

Offset

Offset from UTC time, including daylight saving time. It is advisable to leave it automatically filled, evaluating coordinates, when a data connection is available.

±hh.mm