BLE DOOR SENSOR Each of the 8 bluetooth radio sensors intended to detect the opening of doors has a group of parameters containing settings and status of the resources. Replace the letter x with the channel identifier from A to H. |
|
Hx0 |
MAC address Address of the BLE peripheral consisting of 6 pairs of characters to be entered without separator (shown on the sensor). If the field is empty the resource is not active. XXXXXXXXXXXX |
Hx1 |
Name Set a meaningful name representing the associated function. 4 ... 15 characters - Default: doorx |
THE FOLLOWING PARAMETERS ARE NOT AUTOMATICALLY UPDATED IN THE CLOUD ACCOUNT (KEPT AS LOCAL) IF THE NAME STARTS WITH A POINT INTENTIONAL PUBLICATION IS POSSIBLE WITH THE AT # SMAP COMMAND |
|
Hx2 |
Switch status Current sensor status: 0 door closed / 1 door open. The status is updated based on the activation time. 0 / 1 |
Hx3 |
Tamper status Reports the health status of the sensor. 0 : sensor intact 1 : intervention of the contact that detects tampering 2 : inactivity of the sensor (does not transmit) The status is updated immediately. 0 / 1 / 2 |
Hx4 |
Activation time The status changes only if the input remains stable for the whole period of time set here, in the range 0 to 65535 seconds. 0 = immediate / 1 ... 65535 [seconds] - Default: 3 |
Hx5 |
Battery level Battery charge level that powers the radio sensor. 0...100% |
Hx6 |
Color This optional parameter defines the color to be used by web platform to show the input channel. red / green / yellow / blue - Default: red |