DEVICE - CONSOLE

Some information are sent to local com port at start-up:


ets Jun  8 2016 00:22:57


rst:0xc (SW_CPU_RESET),boot:0x1b (SPI_FAST_FLASH_BOOT)

configsip: 0, SPIWP:0xee

clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00

mode:DIO, clock div:2

load:0x3fff0018,len:4

load:0x3fff001c,len:820

load:0x40078000,len:10420

ho 0 tail 12 room 4

load:0x40080400,len:5116

entry 0x40080648

Model:Avior 2900.CL.1B

Firmware:02.32

IDFver:v3.2.5-dirty

Flash:8MB

DoP:2019/09/04

MAC:30-ae-a4-e2-8f-80


The device accepts commands from the console interface after logging in by entering the device password with the AT#LOGIN command.


ACCESS FROM ANY INTERFACE is blocked

After 30 consecutive attempts with wrong password

AT EACH FOLLOWING ACCESS ATTEMPT A NEW TEMPORARY PASSWORD is generated.


ASK FOR TEMPORARY PASSWORD

SENDING THE CODE RETURNED FROM AVIOR


A string received when the console is closed is stored in parameter D19. After logging in and as long as the console remains open it will not be possible to acquire strings sent to the COM port from external devices.


More information on COM port features and connections can be found HERE.


Rules associated with the console (COM port) are stored in

specific unit R folders

NOTA TECNICA

Commands entered from the console must be terminated with <Cr>

Responses ended with <Cr><Lf>

Throughout this document <Cr><Lf> are intentionally omitted.