PLMN This group contains information and settings associated with the module for communication via the cellular network. |
|
N00 |
Mode Enable / disable the PLMN module, if installed. By selecting LOCAL, no updates will be sent to the cloud when the parameters are changed. The power supply to the module is provided only when this option is enabled to keep low power consumption. 0 = off / 1 = on / 2 = local - Default: on |
THE FOLLOWING PARAMETERS ARE AUTOMATICALLY UPLOADED TO THE CLOUD ACCOUNT ONLY ONCE AT COMMISSIONING IF LOCAL MODE IS SELECTED INTENTIONAL PUBLICATION IS POSSIBLE WITH THE AT # SMAP COMMAND |
|
N01 |
Phone number Information field in which to enter the phone number associated with the main SIM card. |
N02 |
CCID Circuit Card IDentifier read from the main SIM card. |
N03 |
APN address Address of the Access Point Name provided by the operator of the cellular network for main SIM card to access data connection. 3 ... 30 alphanumeric characters |
N04 |
APN username Username for access to the data network of the main SIM card. In most cases it is not required. 3 ... 30 alphanumeric characters |
N05 |
APN password Password to access the data network of the main SIM card. In most cases it is not required. up to 30 alphanumeric characters |
N06 |
SIM2 - Phone number Information field in which to enter the telephone number associated with the SIM card 2, if available. |
N07 |
SIM2 - CCID Circuit Card IDentifier read from the SIM card 2, if available.. |
N08 |
SIM2 - APN address Username for access to the data network of the SIM card 2. In most cases it is not required. 3 ... 30 alphanumeric characters |
N09 |
SIM2 - APN username Nome utente per l'accesso alla rete dati della SIM 2, se presente. Nella maggior parte dei casi non รจ richiesto. 3 ... 30 alphanumeric characters |
N10 |
SIM2 - APN password Password to access the data network of the SIM card 2. In most cases it is not required. up to 30 alphanumeric characters |
N11 |
Operator Name of the operator providing the connection to the cellular network, detected from the network. |
N12 |
Signal Intensity of the radio signal in range 0 ... 100%. Updated once a minute. 0 ... 100 [%] |
N13 |
SIM card in use SIM card currently in use. Some PLMN modules allow the use of 2 SIM cards. |
N14 |
IMEI International Mobile Equipment Identity. Code identifying the PLMN module. |
N15 |
Firmware version Firmware version currently in use for the PLMN module. |
N16 |
Mobile Network Code Mobile Network Code: unique identifier of the cellular network operator providing the connectivity. Detected from the network and updated when changes. |
N17 |
Mobile Country Code Mobile Country Code: identifier of the geographical area of the cellular network to which the device is connected. Detected from the network and updated when changes. |
N18 |
Local Area Code Local Area Code: Identifier of the area to which the belongs the cell to which the device is connected. Detected from the network and updated when changes. |
N19 |
Cell ID Cell IDentifier: unique identifier of the cell to which the device is connected. Detected from the network and updated when changes. |
N27 |
Welcome message Text of the SMS message sent to the user at the beginning of the enabling period (start). Up to 160 characters, blank to disable the service. |
N28 |
Farewell message Text of the SMS message sent to the user at the end of the enabling period (stop). Up to 160 characters, blank to disable the service. The user will be removed from the device memory at the end of the validity period. |