WEB PAGE |
|
The standard index.html web page contains several panels that report the status of resources. The panels can be dragged to change their position and can be opened and closed by clicking on the icon in the title bar (as shown in the figure below). |
|
|
Generic information on resources. Last IP address on the public and local network. Firmware version. Date of production. Last message received from the Telegram chat. Last event detected. |
|
At each connection the symbol in the red box (see figure) flashes. In case of error it turns red. CONTENT Device model. Network currently in use. Name and WebID assigned. WebID Information about the network in use. Main power status and operating time powered from this source. Status of the auxiliary power supply and time powered from this source. Battery status and time powered from this source. Internal temperature of the device with indication of the minimum and maximum values detected during the period. |
|
CONTENT Date, time and time zone. In remote devices this information is obtained on the basis of the geographic location. Clock setting mode. Automatic restart mode. |
|
CONTENT Status of the digital inputs with indication of the accumulated time with closed input (days, hours, minutes). The time can be reset by clicking on the relevant row, this operation will require confirmation. |
|
CONTENT Status of the relay outputs. If the output has been activated by time, the time remaining to the release or the date set for the release will appear under the assigned name. A click on the relevant indication allows you to switch the status. |
|
CONTENT Value of the pulse counter inputs. For each input the name, the number of accumulated total counts and the counts in the period are reported. The unit of measurement reported is the one defined during the channel configuration. |
|
CONTENT Channel name (the type of input is shown by leaving the cursor over the name). Average value of the readings for the analog inputs. For devices connected to the local network, it is possible to view the instant value of the measurement by clicking on the average value. Minimum and maximum values recorded during the measurement period.
The unit of measurement reported is the one defined during the channel configuration. |
|
CONTENT Name, status and battery level for each Bluetooth door sensor. A specific signal is displayed in case of intervention of the tamper contact. |
|
CONTENT Channel name. Temperature detected during the last period and battery level. |
|
CONTENT Name and status of the WiFi plugs controlled by the device. Power currently delivered. Consumption since last activation. Current temperature. A click on the relevant indication allows you to switch the status. |
|
CONTENT Status of the memory bits. If the bit has been activated by time, the time remaining to the release or the date set for the release will appear under the assigned name. A click on the relevant indication allows you to switch the status. |
|
CONTENT Name of the variable and its value. A number will be shown in red, while the texts are shown in blue. Click on the value of a variable to modify it. |
|
CONTENT Play one of the 8 predefined tones by clicking on the corresponding button. |
At the bottom of the page there is an icon that allows you to view the log file. For cloud devices this information is only available if the REMOTE LOG has been activated. |
|
For cloud devices the content of SWAP AREA (in which the device can save free format information) is also available. |
|
