Call Control (CLIP)

Users ››
Parent Previous Next

Behavior of Mobi.Switch at incoming calls from Registered Users can be set to one of the following: (POLICIES:INCOMING CALLS).

NONE

Selecting NONE the CLIP feature is disabled, nothing happens on incoming calls from registered users.

PULSE

An incoming VOICE or FAX call from registered users will activate OUTPUT 1 for the specified OUTPUTS ACTIVATION TIME.

An incoming DATA call from registered users will activate OUTPUT 2 for the specified OUTPUTS ACTIVATION TIME.


The incoming call is terminated immediately, no answer.

This is the factory default setting.


OUTPUTS ACTIVATION TIME is the time an output remains active after a recognized phone call.

Range 1...300 seconds, factory default 3 seconds.


TOGGLE

An incoming VOICE and FAX call toggles OUTPUT 1 on to off and vice-versa.

An incoming DATA call toggles OUTPUT 2 on to off and vice-versa.

If the user remains online, Mobi.Switch will answer the call and confirm the operation.

REVERSE

This mode involves both outputs.


Any incoming call from registered users starts a sequence:


1        output 1 activated for the time set in OUTPUT 1 ACTIVATION TIME

P        interval for the time set in PAUSE TIME

2        output 2 activated for the time set in OUTPUT 2 ACTIVATION TIME

The incoming call is terminated immediately, no answer.

ANSWER

Mobi.Switch answers to incoming call from registered users and waits for commands issued by means of phone keypad (DTMF).

Default commands assigned to phone keypad (could be modified):


1

OUT 1 ON

2

OUT 2 ON

3

OUT 1 PULSE

4

OUT 1 OFF

5

OUT 2 OFF

6

OUT 2 PULSE

7

8

9

*

CONFIRM

0

STATUS SMS

#

DELETE


Once all commands are issued (max 5), confirm the execution typing * (star) key.

Using # (hash) key is possible to delete everything and start again from the beginning.



CONFIGURATION : POLICIES - INCOMING CALLS