Dynamic variables for the status of the I/O resources can be added to the text of sms, emails and recipient alerts.
*id* |
Device name |
*c1* |
Digital counter input 1 value: "0" (if open), "1" (if close) |
*C1* |
Digital counter input 1 value: "off" (if open), "on" (if close) |
*-c1* |
Digital counter input 1 value: "1" (if open), "0" (if close) |
*-C1* |
Digital counter input 1 value: "on" (if open), "off" (if close) |
*c2* |
Digital counter input 2 value: "0" (if open), "1" (if close) |
*C2* |
Digital counter input 2 value: "off" (if open), "on" (if close) |
*-c2* |
Digital counter input 2 value: "1" (if open), "0" (if close) |
*-C2* |
Digital counter input 2 value: "on" (if open), "off" (if close) |
*t1* |
Time counter 1 value (unit of measure not included) |
*t1t* |
Time counter 1 threshold value |
*t2* |
Time counter 2 value (unit of measure not included) |
*t2t* |
Time counter 1 threshold value |
*p1* |
Pulse counter 1 value (unit of measure not included) |
*p1t* |
Pulse counter 1 threshold value |
*p1a* |
Pulse counter 1 above ratio threshold value |
*p1b* |
Pulse counter 1 below ratio threshold value |
*p2* |
Pulse counter 2 value (unit of measure not included) |
*p2t* |
Pulse counter 2 threshold value |
*p2a* |
Pulse counter 2 above ratio threshold value |
*p2b* |
Pulse counter 2 below ratio threshold value |
*a1* |
Analog input 1 value (unit of measure not included) |
*A1* |
Analog input 1 value without decimals (unit not included) |
*A1b* |
Analog input 1 Below threshold value |
*A1a* |
Analog input 1 Above threshold value |
*a2* |
Analog input 2 value (unit of measure not included) |
*A2* |
Analog input 2 value without decimals (unit not included) |
*A2b* |
Analog input 2 Below threshold value |
*A2a* |
Analog input 2 Above threshold value |
*S1* |
Setpoint 1 value |
*s1* |
Safe (antifrost) 1 value |
*S2* |
Setpoint 2 value |
*s2* |
Safe (antifrost) 2 value |
*o1* |
Output 1 value: "0" (if deactivated), "1" (if activated) |
*O1* |
Output 1 value: "off" (if deactivated), "on" (if activated) |
*o2* |
Output 2 value: "0" (if deactivated), "1" (if activated) |
*O2* |
Output 2 value: "off" (if deactivated), "on" (if activated) |