WIFI PLUGS - PARAMETERS

Each of the 8 optional WiFi plugs has a group containing related settings and information. Replace the letter x with the channel number from A to H.


Ox0

MAC address

Address of the peripheral consisting of 6 pairs of characters to be entered without separator (provided with the sensor).

If the field is empty the resource is not active.

XXXXXXXXXXXX

Ox1

Name

Set a meaningful name representing the associated function.

When the remote device is connected, the name assigned to it during its configuration will be acquired.

4 ... 15 alphanumeric characters - Default: plugA ... plugH

THE FOLLOWING PARAMETERS ARE NOT AUTOMATICALLY UPDATED IN THE CLOUD ACCOUNT (KEPT AS LOCAL) IF THE NAME STARTS WITH A POINT

INTENTIONAL PUBLICATION IS POSSIBLE WITH THE AT # SMAP COMMAND

Ox2

Status

Current status of the plug.

0 = OFF

1 = ON

2 = SAFE

0 / 1 / 2

Ox3

Remaining time

By activating a plug it is possible to specify a time or a date for its deactivation. This is the time remaining to shutdown or the release date:

 0000...3600 if formatted with 4 digits is expressed in seconds

 012035 if formatted as six digits is expressed in hhmmss

 2106171230 if formatted with 10 digits it is a date YYMMDDhhmm

If the on-board clock has never been set, the device will only count hours and minutes, ignoring the date.

Ox4

Color

This optional parameter defines the color to be used by web platform to show the output channel.

red / green / yellow / blue - Default: green

Ox5

Temperature

The current temperature measured by the integrated sensor.

Returns 100 if the plug is not reachable.

0...40 / 100 °C

Ox6

Power

The current power consumed by devices attached to the plug.

2...2300 W

Ox7

Energy

The energy consumed by the devices attached to the plug since the last time the plug has been switched on.

When the plug is switched off, the value remains and is reset at the next switch on.

When the counter reaches the limit of 999999 it restarts from 0.

0...999999 kWh