|
GEOLOCATION This group contains information and settings associated with the geographical location of the device. Some features depend on the correct geographical location:
|
|
G00 |
Mode Positioning mode: SET with command, obtained from the CELLULAR NETWORK or by means of GNSS receiver. Parameters can be modified only selecting MANUAL mode 0 = manual / 1 = cell / 3 = GNSS - Default: manual (set) |
|
G01 |
Latitude Latitude of the device, set or (last) obtained automatically. decimal degrees |
|
G02 |
Longitude Longitude of the device, set or (last) obtained automatically. decimal degrees |
|
G03 |
Range If the position was obtained using the PLMN cell, this parameter indicates approximately the radius within which the device should be located. The value is 10000000 when the cell is not recognized and the position refers to the centroid of the operator's country. The value is 0 (zero) when the location was obtained using the IP of the WiFi connection. meters |
|
G04 |
Address Address of the device, can be obtained with AT#RGEO command which will reverse geocoding starting from the latitude and longitude data. This command involves data exchange with the server and can be used up to 5 times per day. |
|
G05 |
Language Language in use at device location, must be entered a two-character ISO identification code (e.g.: EN). It is advisable to leave it automatically filled, evaluating coordinates, when a data connection is available. 2 ISO characters |
|
G06 |
Timezone Timezone at device location, must be correctly formatted (eg: Europe / Rome). It is advisable to leave it automatically filled, evaluating coordinates, when a data connection is available. |
|
G07 |
Offset Offset from UTC time, including daylight saving time. It is advisable to leave it automatically filled, evaluating coordinates, when a data connection is available. ±hh.mm |
|
G08 |
Fixrate For devices equipped with GNSS receiver, the position update interval can be set between 1 and 65535 seconds. 1 ... 35535 [seconds] - Default: 60 |
|
G09 |
Accuracy For devices equipped with GNSS receiver it is the positioning accuracy. Greater accuracy results in a longer acquisition time. Can be set between 1 and 1000 meters. 1 ... 1000 [meters] - Default: 50 |
|
THE FOLLOWING PARAMETERS ARE NOT AUTOMATICALLY UPDATED IN THE CLOUD ACCOUNT (KEPT AS LOCAL) INTENTIONAL PUBLICATION IS POSSIBLE WITH THE AT # SMAP COMMAND |
|
|
G10 |
Altitude Altitude above sea level rendered by the satellite navigation system. meters |
|
G11 |
Course over ground Direction of movement. 0...359 gradi |
|
G12 |
Speed over ground Speed of movement. km/h |
|
G13 |
Satellites Number of satellites in use. 0 ... 12 |
|
G14 |
HDOP Horizontal diluition of precision HDOP 0.5 ... 99 - 0: Invalid fix, GNSS data not available |